deformations

英 [ˌdiːfɔːˈmeɪʃənz]

美 [ˌdifɔrˈmeɪʃənz]

n.  损形; 变形; 畸形; 破相; 变丑; 残废
deformation的复数

柯林斯词典

• V-ERG （使）变形;（使）成畸形;损毁…的外形
  If somethingdeformsa person's body or something else, it causes it to have an unnatural shape. In technical English, you can also say that the second thingdeforms.
  1. Bad rheumatoid arthritis deforms limbs...
     严重的类风湿性关节炎会造成四肢变形。
  2. ...the ability of a metal to deform to a new shape without cracking.
     金属重新塑形而不断裂的能力

双语例句

• Special attention is given to the effect of reinforcement on delayed deformations and on the stability of the embankments and foundations.
  特别研究了土工织布加固对堤坝下软土的滞后变形和稳定性的影响。
• The wing withstands vertical bending, chordwise bending and torsional deformations, and the rotor blade is considered to be capable of rigidly withstanding one order flap and lag motions.
  机翼承受垂向弯曲、弦向弯曲和扭转变形，螺旋桨旋翼的桨叶认为是刚性的并承受一阶挥舞和摆振。
• Stress, slip, and earthquakes in models of complex single-fault systems incorporating brittle and creep deformations
  具有脆性形变和蠕动变形的复合单断层系模型中的应力、滑动与地震
• As welding deformations of curved hull block is complex, its is difficult to predict its deformation.
  由于船体曲板焊接变形的复杂性，曲板焊接变形的预测一直为焊接变形预测的一个难点。
• The influence of inclined struts on the elastic properties under axial, bending, and shear deformations as well as the impact of axial deformation of horizontal struts were considered comprehensively.
  综合考虑了胞体中斜支柱的轴向、弯曲和剪切变形以及水平支柱的轴向变形的影响，利用最小势能原理得到了材料的弹性性能与各向异性比及相对密度的关系。
• We discuss in more detail the application of the coupledmode formalism to scalar waveguide deformations.
  我们将详细讨论耦合模公式对标量波导畸变的应用。
• Then the door deformations in X and Y directions are analyzed with both theoretical and real gaps.
  分别对车门在理论间隙和实测间隙下的Y向变形、X向变形进行分析。
• In this paper, the general phenomenon about subsidence and deformations of surface in subway construction is illustrated.
  阐述了城市地铁施工过程中，地表沉陷与变形的一般现象，探讨了地表沉降指数函数计算公式。
• Stress concentrations due to prestressing or other loads and to restraints or imposed deformations shall be considered.
  应考虑预加应力或其它荷载以及限制或施加变形引起的应力集中。
• It would make no difference if the bar deformations were totally inelastic.
  如果杆的变形完全是非弹性变形时这也就没有什么区别了。